Filter
Top Products
Introduction
This instruction manual will show you how to install your
SPIRIT
Communications
System. Please read the instructions carefully before beginning installation.
Overview of System
What You Should Find in the Boxes
With the Controller:
controller
three 7’ line cords
system directory label
cord labels
Administration Manual
Customer Installation Instructions
With the Sets:
telephone set
14’ telephone cord
designation labels/plastic strips
User Manual
Reference Card
If your network interface jack has two lines on a single jack you should purchase a 267D
adapter from your AT&T Phone Center store. If you need longer line and telephone cords, you
should purchase them also.
CONTROLLER
CONTROLLER SECTION
Network Interface Jack
WIRING RUN SECTION
TELEPHONE SET SECTION
a jack field installed
near your controller
location
cable extending from
the jack field to each
telephone location
AC Outlet (standard 120 VAC)
jumper cords
plugged into the
jack field and into
the controller
a modular connecting block at
the end of each cable
(telephones will be plugged
in later)
2
Customer Installation Instructions