Filter
Top Products
TABLE OF CONTENTS
Introduction
2
Overview of System
2
Step 1 Plan Your System
3
Step 2 Check Outlet Grounding
3
Step 3 Mount Controller
4
Mount Controller on Wall
4
Test the Incoming Telephone Lines
5
Connect Telephone Lines to Controller
5
Step 4 Wiring Runs
6
Business (4-pair) Wiring
7
Mount Jack Panel Boxes
8
Run Cable to All Telephone Locations
9
Install Modular Connecting Blocks
10
Using Customer Convenience Wiring
12
Install Plugs
12
Install Wire Junctions
12
Secure Telephone Wire
12
Install Modular Connecting Blocks
12
Steps 5 InstalI Telephone Sets
14
Record Installation Date
14
Desk Mount
14
Wall Mount
14
Label Intercom Extension Number
14
Step 6 Connect System To Wiring Runs
15
Testing The System
Testing the Incoming Telephone Company Lines
Testing the Wiring Run
Self Test
Controller Test
Telephone Test
Troubleshooting
Optional Accessories
Replacement Parts
15
15
15
15
16
17
17
17
17
NOTICE: While reasonable efforts were made to ensure that the information
in this document was complete and accurate at the time
of
printing, AT&T
assumes no responsibility for any errors. Changes or corrections to the
information contained in this document may be incorporated into future
re-issues.
Customer Installation Instructions
1