Filter
Top Products
Phone Adapter with Router
35
Chapter 6: Using the Web-based Utility
The Voice Tab
RTP Bytes Sent. Displayed here is the number of RTP bytes sent by the Phone Adapter.
RTP Packets Recv. Displayed here is the number of RTP packets received by the Phone Adapter.
RTP Bytes Recv. Displayed here is the number of RTP bytes received by the Phone Adapter.
SIP Messages Sent. Displayed here is the number of SIP messages sent by the Phone Adapter.
SIP Bytes Sent. Displayed here is the number of SIP bytes sent by the Phone Adapter.
SIP Messages Recv. Displayed here is the number of SIP messages received by the Phone Adapter.
SIP Bytes Recv. Displayed here is the number of SIP bytes received by the Phone Adapter.
External IP. Displayed here is the external IP address used for NAT mapping.
Line 1/2 Status
Lines 1 and 2 have the same status information available.
Hook State. Displayed here is the status of the Internet phone line’s readiness. On indicates that it is ready for
use, while Off indicates that it is in use.
Registration State. Shown here is the status of the line’s registration with babyTEL.
Last Registration At. Shown here are the last date and time the line was registered.
Next Registration In. Shown here is the number of seconds until the next registration.
Message Waiting. This indicates whether you have new voicemail waiting.
Figure 6-9: Line 1 Status