Filter
Top Products
Phone Adapter with Router
18
Chapter 5: Using the Interactive Voice Response Menu
Using the Interactive Voice Response Menu
Check Firmware
Version
150 Hear the version number of the firmware
currently running on the Phone Adapter.
Check Primary DNS
Server IP Address
160 Hear the IP address of the primary DNS
(Domain Name Service) server.
Check Internet Web
Server Port
170 Hear the port number of the Internet Web
server used for the Web-based Utility.
Check Local IP
Address
210 Hear the local IP address of the Phone
Adapter.
Set Internet
Connection Type
101 Press 0 to use DHCP.
Press 1 to use a static IP
address.
Press 2 to use PPPoE.
Select the type of Internet connection you are
using. Refer to the documentation supplied
by your Internet Service Provider (ISP).
Set Static IP Address 111 Enter the IP address using
numbers on the telephone
keypad. Use the * (star)
key when entering a
decimal point.
First, set the Internet Connection Type to
static IP address; otherwise, you will hear,
“Invalid Option,” if you try to set the static IP
address.
Interactive Voice Response Menu
Action Command
(press these
keys on the
telephone)
Choices Description
firmware: the programming code that
runs a networking device.
dhcp (dynamic host configuration
protocol): a protocol that lets one device
on a local network, known as a DHCP
server, assign temporary IP addresses to
the other network devices, typically
computers.
static ip address: a fixed address
assigned to a computer or device that is
connected to a network.
pppoe: a type of broadband connection
that provides authentication (username
and password) in addition to data
transport.