LG Electronics LKD-8DS Telephone User Manual


 
GDK-20W DIGITAL WIRELESS KEY TELEPHONE SYSTEM
70
4.3 The Features of ISDN CO Line ( T-Interface )
1. Normal CO Line Features
Normal CO Line Features of STIB/BRI is the same as Analog CO Line. Normal CO Line Features are
described GDK-20W Manual. Consult your GDK-20W for normal CO Line Features.
2. MSN
GDK-20W will receive some called party number from PX via DID line, then looks up the MSN address
TABLE, ISDN Program (Main Menu 4) - MSN Table (Sub Menu 9) to provide ring signal to an ISDN
internal port.
GDK-20W will send the information including the called party number to the ISDN station that is
ringing.
(1) Maximum table entry : 24.
(2) The CO line should be programmed as DID Line, CO Base Program (Main Menu 3) – ISDN
Attribute(Sub Menu 2) - DID Use(Terminal Menu 4).
(3) If the called party number is not matched with MSN table then GDK-20W will treat the call like
as DID.
(4) If the called CO line number is not programmed then search all tables.
(5) If there is matched CO line number in MSN address table then search only matched entry of
the table.
(6) Maximum 8 device can be connected to a S0 port.
(7) MSN Table. ISDN Program (Main Menu 4) - MSN Table (Sub Menu 9)
Item CO Line Number Telephone Number Station Number MSN Number
Flex 1 4 2 3
Range 1-8 Max 20 Digits 2 or 3 Digit
Station Number
1-8
Default None None None None
3. D.I.D. ( Direct Inward Dialing )
The system operates DID CO, if ISDN CO assigns DID CO through CO Base Program (Main Menu3) –
ISDN Attribute (Sub Menu2) – DID Use (Terminal Menu 4). If you want to call to a ISDN station which
assigns sub-addressing of DID or DISA, you should dial station numbers and sub-address or MSN
number (1-8).
If your PX send full called party number(area code + prefix number of DID, real DID number(for station
number)) and then please set CO Base Program (Main Menu3) - ISDN CO Attribute (Sub Menu2) -
DID_RN(Terminal Menu2) to length of (area code + prefix did number)).
4. CLIP (Calling Line Identification Presentation)
When a call exists through DISA or DID, Calling line identification(CLI) of the incoming call will be
displayed on the internal called station’s keyset if PX provide CLI information.
-. Calling line identification (CLI) or name which is matched with the speed dial list is displayed to
original called party extension.
-. First, The system search station speed dial buffer to find out the programmed name, and if
there is not matched then search system speed dial buffer.(Not implemented Yet)
-. CLI information will be printed in SMDR record through RS-232 port.