Filter
Top Products
GDK-20W DIGITAL WIRELESS KEY TELEPHONE SYSTEM
20
Back-Board Installation
A wooden backboard is recommended for all installations and must be installed when the location has masonry or
plasterboard walls. A ½ inch plywood material is sufficient for most installations. The back-board should be mounted at
a convenient height, about 1 meter above the floor, and be bolted in two number of places to distribute the weight of the
system.
Verify On-Site Equipment
Once the equipment installation site has been identified and a dedicated earth ground, and lighting and ventilation are
available, verify that all equipment required are on-site and have not been damaged during shipment. Assure there is no
shipping damage. Note that a mounting template is packed with KSU and this template will be required later in the
installation. Check that the type and quantity of boards received is correct and optional equipment are on-site.
If any equipment is damaged or missing, notify appropriate personnel to correct the situation.