LG Electronics GDK-20W Telephone User Manual


 
GDK-20W DIGITAL WIRELESS KEY TELEPHONE SYSTEM
65
[Trans/Pgm] + ## + Flex. Button 8 + Station Number + [Hold/Save]
Press the [Trans/Pgm] button, [Trans/Pgm] LED will flash(60 IPM Flash) and [On/Off] LED will be
turned on.. Then you can enter then user program mode.
Press ## .
Press flexible 8
Dial station number that you want to de-subscribe.
Press [Hold/Save], you will be heard confirmation tone.
Condition
1) Wireless terminal must be de-subscribed to system for normal service.
2) Only attendant can de-subscribe the wireless terminals.
3) Attendant can de-subscribe another wireless terminal after one subscribing procedure.
4) If attendant want to de-subscribe wireless terminal that was subscribed already, it will be heard
error tone.
2) At the GDC-335H
[Function] + 9 + 0000 + [Function] + Select Park number + [Function]
Press [Function( )] button
Press 9
Enter User PIN number “0000”
Press [Function( )] button
Select PARK number with UP( ), DOWN( ) key.
Press [Function( )] button
If the below LCD message is displayed. Power-off the wireless terminal
E S BSCRDIUB
RE S PWPRS
3) At the GDC-340H
[MENU(UP or DOWN)]
+ 5 + 2 + PIN Code +
[OK] +
or (To select FP#) +
[OK]
Press MENU(UP or DOWN) button.
Press . (Or set ‘
>
’ mark to ‘
5 System
’ by pressing
UP
( ) button or
DOWN
( ) button and
press
OK
button).
Press . (Or set ‘
>
’ mark to ‘
5 UnRegister
’ by pressing
UP
( ) button or
DOWN
( ) button and
press
OK
button).
Enter PIN code(0,0,0,0) If a user has changed PIN code before, the changed one should be
entered.
Press
OK
button.
If necessary, press
UP
( ) button or
DOWN
( ) button to select FT number which is desubscribed.
If the desubscribed FT number is displayed on the second line of LCD, stop pressing
UP
( ) button
or
DOWN
( ) button.
Press
OK
button.
* Note
GDC-340H tries to synchronize to next registered system.
If there isn’t next registered system, handset displays “UNREGISTERED” on LCD.