Filter
Top Products
28
DECT
Registering with a base station
Select > SETTINGS > DECT > REGISTER.
The Konftel 300Wx registration guide starts.
See page 12 for a detailed description of the registration process.
Deregistering from a base station
This option only works with a Konftel DECT base station.
Select > SETTINGS > DECT > DE-REGISTER.
The Konftel 300Wx retrieves a list of the handsets that have been registered with that particular
Konftel DECT base station. There is a filled box in front of the name of the handset that you are
using (Konftel 300Wx).
Mark the handset you want to de-register and press OK to remove it.
Enter the base station’s PIN code (0000) and confirm your choice by pressing OK.
Select a base station
Select > SETTINGS > DECT > BASE.
The AUTO option and the base stations that are registered are displayed as options in the menu.
AUTO (default) means that the Konftel 300Wx automatically selects the registered base
station that has the greatest signal strength.
Enabling PARK code
Select > SETTINGS > DECT > PARK.
Disabled is defalult. PARK is a function that makes it possible to lock a handset/confe-
rence phone to a specific base station using a security code.
Select Inband DTMF generation
Select > SETTINGS > DECT > ACTIVATE DTMF.
DTMF (Dual-tone multi-frequency signaling) is used for telecommunication signaling over
analog telephone connections, eg. to a PBX or to log on to a phone bank or a conferencing
service.
The tones can be generated by the phone (inband – which is default) or by the PBX it is
connected to.
Select Inband DTMF generation
Select > SETTINGS > DECT > MULTIKEY DIALING.
Multikey dialing means that all DTMF tones are sent as one command using speed-dial
SETTINGS