25
It is possible to record a phone conference on an SD (Secure Digital) memory card so
you can listen to it later on. It is possible to record a call in progress and use the Konftel
300Wx as a dictaphone.
A flashing symbol appears on the display screen during recording. A beep is heard every
10 seconds so that other parties in the call know it is being recorded. The beep can be
turned off (see page 27).
The recorded call is saved on the memory card. The document is named after the time at
which the recording began (e.g. 14-35-01.wav) and is saved in a folder with the current
date. This name can be changed after the recording has ended (see page 27).
STARTING A RECORDING
Remember to notify all parties in the call before you start recording.
Press the button and press OK to confirm.
The recording symbol flashes on the display screen.
MUTE FUNCTION
Press the
button during a call to turn the microphone off.
The LEDs change from blue to red.
The other party cannot hear what you are saying and only the called party is recorded.
HOLD
Press during the call to put the call on hold.
The LEDs change from blue to flashing red.
Both the microphone and the speaker are turned off and the call is on hold. None of the parties
will now be recorded.
ENDING A RECORDING
Press the button press OK to confirm.
The recording symbol is no longer displayed on the screen.
If you are recording a call and the call is ended, you will be asked if you want to stop
recording.
RECORDING