Filter
Top Products
17
DURING A CALL
ADJUSTING THE SPEAKER VOLUME
Adjust the speaker volume using the buttons and .
Adjusting the speaker volume when multiple connections are connected
If you have selected multiple connections, you can adjust the volume level for each con-
nection. This is useful if the connections have different volume levels.
Press the or key to display the current volume setting.
The current main volume appears on the display screen. Above it are two or three smaller
volume indicators which can be used to adjust the different connections.
Increase or decrease the speaker volume for all connections in the normal way using
the and keys.
Use the arrow keys to mark one of the connections.
Adjust the speaker volume for the selected connection using the keys and .
MUTING THE MICROPHONE
Press to turn off the microphone.
The LEDs change from blue to red. The other party cannot hear what you are saying.
Press to reconnect the call.
PLACING A CALL ON TEMPORARY HOLD
Press to put the call on hold.
The LEDs change from blue to flashing red. Both the microphone and the speaker are turned off
and the call is on hold.
Press to reconnect the call.
ENDING CALLS
End the call by pressing .