Filter
Top Products
24
SOUND
Adjusting ring level volume
Select MENU > SETTINGS > SOUND > RING LEVEL.
Select your choice and press OK to conrm.
There are six volume levels plus a silent mode. You will hear the ring tone for each
level you select. If you select silent mode, an LED on the phone ashes when an
incoming call is received.
Deactivating keypad tones
You can select whether or not you want a tone to be heard when you press a button. Note
that this setting does not affect the tone you hear when you dial a number in call mode.
Select MENU > SETTINGS > SOUND > KEY TONE.
Select your choice and press OK to conrm.
Adjusting sound (equalizer)
The sound reproduction can be adjusted to the required pitch (SOFT, NEUTRAL and
BRIGHT).
Select MENU > SETTINGS > SOUND > EQUALIZER.
Select your choice and press OK to conrm.
SECURITY
The PIN code is used to enable the SIM card when the telephone is started up. The code
is supplied with the SIM card. The original code can be changed to any code of your
choice comprising 4 digits, or it can be disabled so that the telephone can be started up
without a code.
If the wrong PIN code is entered three times in a row, it becomes invalid. The SIM
card must then be unlocked using the PUK code which was also supplied with the SIM
card.
State whether or not a PIN code will be required
Select MENU > SETTINGS > SECURITY > REQUIRE PIN CODE.
Make your choice and conrm by pressing OK.
Change PIN code
Select MENU > SETTINGS > SECURITY > CHANGE PIN CODE.
SETTINGS