Filter
Top Products
10
RECHARGING BATTERIES
The Konftel 300M lets you know when the battery’s remaining capacity is less than one
hour of talk time. An audible signal is emitted and the LEDs ash three times. The battery
recharging symbol on the display screen will also start ashing.
Recharge the Konftel 300M by placing it on the charging stand.
The battery can also be recharged by plugging the power cable into the Konftel 300M.
Batteries
The battery has a button to display the battery’s remaining capacity.
The Konftel 300M comes with a charged battery, but it may need recharging to full
capacity depending on how long it has been in storage.
A fully-charged battery provides talk time of about 30 hours or 25 days of standby time.
The Konftel 300M automatically switches to sleep mode after a few minutes of inactivity.
Warning!
• Do not attempt to open or modify the battery.
• Do not expose the battery to moisture or extreme heat.
• Extreme heat, short-circuiting or any attempt to modify the battery may cause it to
ignite or explode.
• Only use the battery provided or a Konftel-recommended replacement battery.
Battery charger (optional)
The optional battery charger allows for external recharging of one or two batteries. Charge
status is denoted by the LED for each charging channel on the charger. The LED is red
during charging and green when the battery is fully charged. A red ashing LED indicates
that the battery is damaged and must be replaced.
GENERAL