Konftel 300M Conference Phone User Manual


 
8
GENERAL
CONNECTING AND INSTALLING THE UNIT
Open the battery cover and insert the SIM card as illustrated.
Insert the battery as shown in the picture.
The Konftel 300M starts up and after a while an input window for the PIN code is shown in the
display.
Enter the SIM card’s PIN code and conrm with OK.
You can opt to press C instead of entering your PIN code to start up Konftel 300M in
USB mode.
Place the conference phone in the middle of the table.
Place the conference phone at least 20 cm from the users.
USB mode
If the telephone is started up without a SIM card or if you press C during start-up when
the telephone asks for the PIN for the SIM card, the telephone will start up in USB mode
instead. This is indicated by the display showing the text USB instead of signal strength.
In USB mode all settings and options relating to mobile calls are removed. Instead a new
option appears in the settings menu: MENU > SETTINGS > ENABLE SIM. This restarts
the telephone so that the PIN code can be entered.
Unlock
Push SIM
card down
Lock
SIM card
(under battery)