Filter
Top Products
MANUFACTURER MODEL SWITCH
SETTING
AUTO-
DIAL
SEE
NOTE
(Digital)
103 series 2 or 3 Yes
Trillium Panther
Talkto 616
2 or 3
2
---
---
1 & 2
1 & 2
Vodavi Electronic
Key System
See Note Yes 9
MANUFACTURER MODEL SWITCH
SETTING
AUTO-
DIAL
SEE
NOTE
Walker Marathon
Poet
1 or 4
1
Yes
Yes 1
! If your telephone does not allow autodialing, you can still communicate by dialing with the keypad on your telephone. Refer
to Chapter 4 for information on manual dialing.
NOTES:
1.
The KONEXX product may require a custom factory setting for this phone set. If difficulties are encountered, contact
Technical Support.
2.
Sufficient data is not available as to whether the phone system will support autodialing with the KONEXX product.
3.
The KONEXX product will not support autodial on Model 7300 telephones.
4.
You may have to dial an outside access number, such as a 9, on the telephone before autodialing.
5.
This telephone has nonstandard handset wiring and is not compatible with the KONEXX product.
6.
The KONEXX product requires the use of a special adapter cable set. This phone has nonstandard handset wiring. Contact
Technical Support.
7.
When autodialing the user must dial a number on the keypad of the telephone set to maintain the line.
8.
These phone systems may be able to be programmed to obtain a direct trunk access to enable autodialing. Contact
Technical Support for additional information.
9.
The KONEXX product requires a custom factory setting to work on these phones. Contact Technical Support.
Chapter 4
Sending data and faxes
Y
ou can send data and faxes by either automatically dialing (autodialing) a telephone number or manually dialing the number.
Autodialing data and fax calls
To autodial calls, the telephone and/or your phone system connected to your KONEXX Office Konnector must support
autodialing. For a list of telephones that support autodialing, refer to page 6.
! If your KONEXX Office Konnector is connected to a digital telephone that does not support autodialing, use the manual
dialing procedure on page 11
1.
Prepare your modem, fax/modem, or fax machine for sending.
2.
Lift the telephone handset and listen for a dial tone. Leave the handset out of the cradle. DO NOT hang it up, or you will
terminate the call.
3.
To make a connection using a modem or fax/modem, press the Enter (↵) key on your computer.