Filter
Top Products
11 MISCELLANEOUS TOPICS
86 CONTENTS TM-D710A/E
Target ID - Callsign
Target Lat Long
Target SOG - Speed over Ground
Target COG - Course over Ground
Target Altitude - Mean -sea-level
Figure 11-5 AvMap G5 and TM-D710A/E
You can choose three of these five data fields to display on the AvMap screen. So, when your target
callsign is moving, you can get real time information and a visual display on the AvMap G5.
A stationary callsign is displayed on the AvMap screen as a blue circle, if the mark moves more that
200 meters on a new report, AvMap creates a moving target or red triangle designator.
Recently added to the AvMap operating system is now full APRS icon represention. The decoded
APRS packet from the Kenwood TM-D710A/E (in Kenwood waypoint format) is processed by the
AvMap G5 operating system. When the mark is made on the screen, it now can be one of over 100
standardized APRS icons along with the callsign.
Setup of the Kenwood transceiver with AvMap is very simple. Using the defaults of the Kenwood
transceiver, only a few menu configurations are needed to set up the TM-D710A/E.
Menu 600: (BASIC SETTINGS):
MY CALLSIGN: Your callsign and “-9”. (such as “W6GPS-9”)
Menu 602: (GPS PORT)
BAUD RATE: 9600
INPUT: GPS
OUTPUT: WAYPOINT
Menu 603 (WAYPOINT):
FORMAT: KENWOOD
NAME: 9-CHAR
Menu 611: (BEACON TX ALGORITHM)
METHOD: AUTO or SmartBeaconing