Filter
Top Products
8 EchoLink
62 CONTENTS TM-D710A/E
Figure 8-39 Sysop Setup Window: DTMF Tab
Select the Internal radio button in the DTMF Decoder frame. In order for you to administer your
link station, we recommend that you input a DTMF command for LinkDown and LinkUp for the
EchoLink server. Keep these commands private to prevent any unauthorized person other than
the link station manager from gaining administrative control of the station. Click the Ident tab.
Figure 8-40 Sysop Setup Window: Ident Tab
Configure in the Station Identification frame the type of station ID that will be automatically
transmitted for identification purposes. Choose the correct form of over-the-air legal ID for your
local area. The callsign entered here does not necessarily need to match the callsign used for
your EchoLink login. If the “Spoken Voice” radio button is selected, the EchoLink software uses
speech synthesis to announce the station callsign. If the “Morse” radio button is selected, an ID
will be sent by Morse code.
Check the While Active checkbox and configure the ID interval for sending the ID. If the Wait for
clear frequency checkbox is checked, the ID will only be transmitted after the frequency becomes
clear. Next, click the Options tab.