Filter
Top Products
31
1 With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
2 Press the or key to select “ ”.
3 Press the MENU key then press or to select
“
” (PTT ID Side Tone is on) or “ ” (PTT ID
Side Tone is off).
4 Press the MENU key to exit the selection.
5 Press the PTT, MON, or CAL key to exit Setting Mode.
n Mute Hold tiMe
Mute Hold Time keeps the speaker muted for a brief
moment, after a signal has been received. This prevents
interference with the PTT ID signal.
To set the hold time:
1 With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
2 Press the or key to select “ ”.
3 Press the MENU key then press or to select
“
” (hold time is off), “ ” (500 ms), “ ”