Filter
Top Products
28
Selcall (Selective calling)
A Selcall is a voice call to a particular station or group of
stations. Each transceiver is set up with an individual ID
number for use with selcalls.
n Making a Selcall
1 Press the CAL key.
2 Press the or key to select an ID number.
• “ ” represents a single station, “ ” represents a group of
stations, and “ ” represents all stations.
3 Press the PTT switch to transmit the selected selcall ID.
• The transceiver waits for the Data Transmit Modulation
Delay time {page 29} before transmitting the selcall ID.
• The side tone sounds if PTT ID side tone {page 30} is
enabled.
4 Release the PTT switch to end transmission.
5 Press the CAL key to return to operating mode.
Note: If Optional Signaling (menu “ ”) has been set to “ ”
(FleetSync), you can also set up an Individual Selcall Alert
type (menu “
”) and Group Selcall Alert type (menu “ ”).
Individual and Group Selcall Alert types range from “ ” (off)
and “ ” (type 1) to “ ” (type 10). Refer to the menu list on
page 46.