Filter
Top Products
30
n PTT ID
The transceiver can send a PTT ID signal when pressing
the
PTT switch (beginning of transmission) or when
pressing and releasing (beginning of transmission and end
of transmission) the
PTT switch.
1 With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
2 Press the or key to select “ ”.
3 Press the MENU key then press or to select
“
” (PTT ID is off), “ ” (send your own PTT ID
at the beginning of transmission), or “
” to “ ”
(send selected list ID number PTT ID at the beginning
and end of transmission).
4 Press the MENU key to exit the selection.
5 Press the PTT, MON, or CAL key to exit Setting Mode.
Note: Transceiver's individual ID number is not available for
selection as PTT ID.
n PTT ID SIDe Tone
When the PTT switch is pressed and/or released, a tone
will sound through your own speaker when the PTT ID is
transmitted.
To turn the PTT ID Side Tone on or off: