Filter
Top Products
Caller ID Speaker Phone V10M10_IM_EN_03232007
www.jWIN.com
- 7 -
GETTING STARTED
Getting the Telephone Ready for Use
1. Choose a desired location for the unit (mounted or on a flat, level surface).
2. Adjust the removable tab located above the speaker on the base of the phone.
• The tab slides for easy removal.
• For wall mounted units, the side of the tab with
the lip must be situated toward the top of the
base to allow the handset to hang on the base
without falling. The lip fits into the opening under
the earpiece on the handset.
• For flat, level placement, the side of the tab with
the lip should be situated toward the bottom of the
base to allow smooth removal of the handset from
the base.
3. Plug one end of the coiled telephone cord into the jack on the handset, and the
other into the matching jack on the left side of the unit’s base.
LIP
NO LIP