Filter
Top Products
Caller ID Speaker Phone V10M10_IM_EN_03232007
www.jWIN.com
- 12 -
OPERATIONAL INSTRUCTIONS
Description of the Display
The JT-P531 features a three-line LCD. The top line displays basic information; the
middle line shows the telephone number of the incoming call; and the bottom line
displays the name of the caller. Also included on the display is helpful information
such as:
• The word, “LOW” appears on the screen when the battery power is low.
• The word, “NEW” appears on the screen when there are new incoming calls.
• The word, “CALL#” indicates the total number of incoming calls received.
• Hour: Minute Morning/Afternoon Day/Month are displayed. For example:
“10:15 AM 21/03” (Year is not displayed)
• If the time and date programmed into the telephone differ from the
telephone company’s record, the telephone will automatically adjust to the
service provider’s information when receiving calls.
• When there has been no operation on the telephone for more than 20
seconds, the LCD will only display the time and date, amount of received
calls and amount of incoming calls.
• The JT-P531 can store up to 94 incoming calls. Once 94 calls have been
received, the oldest call will automatically erase when a new call is received.
Basic Setup
Note: Please be sure the telephone lines are connected well and batteries or AC
adapter are installed before starting setting.
1. HOW TO ENTER THE SETUP MODE
• Long Press (Approx. 4 seconds)
[DIAL] to enter setup menu.
• The LCD display will appear as
shown here, however, you must use
[▲]or [▼]to select from the menu
including Select Language, Local
Area Code, Regional AC’s (Area
Codes), and Date/Time Setting.
• Press [DEL] to exit setting manually
or it will exit automatically if no selection is made after 5 seconds.
2. SET DATE / TIME
• When the LCD displays “DATE /
TIME”, press [DIAL] to enter this
function.
• Press [▲] or [▼] to set the month.
• Press [DIAL] to confirm.
• Use the same procedure to set the
day hour, and minute.