Filter
Top Products
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
www.jWIN.com
- 6 -
GETTING STARTED
Getting the Telephone Ready for Use- continued
• For wall mounted units, the side of the tab with the lip must be situated toward
the top of the base to allow the handset to hang on the base without falling.
The lip fits into the opening under the earpiece on the handset.
• For flat, level placement, the side of the tab with the lip should be situated
toward the bottom of the base to allow smooth removal of the handset from
the base.
3. Plug one end of the coiled telephone cord into the jack on the handset, and the
other into the matching jack on the left side of the unit’s base.
4. Plug one end of the flat telephone cord into the jack in the rear of the unit’s base
(marked TEL-LINE), and the other end into the wall jack which supplies
telephone service.
LIP NO LIP