Filter
Top Products
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
www.jWIN.com
- 13 -
OPERATIONAL INSTRUCTIONS
Basic Setup-Continued
7. SET LOCAL AREA CODE
• When the LCD displays “LOCAL AREA CODE”, press [OK/DIAL] to enter
this function.
• Press [▲] or [▼] to select the first digit of area code.
• Press [OK/DIAL] to confirm the first digit.
• Use the same procedure to set the rest of the digits.
8. PHONE BOOK ENTRY WITHOUT EMERGENCY NUMBER SETTING
• When the LCD displays “STORE NUMBER”, press [OK/DIAL] to enter.
• Flashing prompt will appear in the middle of the display.
• Use the keypad to enter the desired number.
• Press [OK/DIAL] to confirm.
• A flashing prompt will now appear on the bottom line of the display.
• Use the keypad to enter the name (16 letters max.).
• Press the number key containing the desired letter and press it repeatedly
until that letter is displayed on the LCD screen. Press the “1” key once for a
space (repeatedly for a symbol). Press “*” and “# ” keys for additional
symbols.
• Press the [DEL] button to correct entry.
• Press [OK/DIAL] to confirm followed by the words “EMERGENCY OFF” on
the display.
• Press [OK/DIAL] to confirm followed by the word “SAVE” on the display and
an audio announcement: “Name recording.”
• If you wish to not record a voice tag, press the [DEL] button or;
• Press and hold [OK/DIAL] until there is a beep.
• To record a Name Tag for the number entered, press and hold [OK/DIAL]
during the entire recording process until finished.
• Release [OK/DIAL] to end the recording. There will be an audio signal of
“STORE,” and the words “STORE NUMBER” will be shown on the display.
• Press the [DEL] button to exit this setting.
Note: The JT-P551 can store up to 30 records. The words “MEMORY FULL” will
appear on the LCD screen when the records are full.