Filter
Top Products
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
www.jWIN.com
- 16 -
OPERATIONAL INSTRUCTIONS
Emergency Call Function
1. EMERGENCY MESSAGE
It is important you record the personalized message with all the important
information as below (part B).
A. This unit includes a back-up pre-recorded message. “THIS IS AN
EMERGENCY CALL, TO ACCEPT THIS CALL PRESS ZERO.”
B. Your own message must be recorded to properly use the Emergency Help
System (max. recording time is 20 seconds). The message should always
end with “please immediately hang up if you cannot get me help now. To
accept this call press zero”.
Example: There is a medical emergency at the home of John Smith at 123
Main Street, Apt. 4D, please come at once. Please immediately hang up if you
cannot get me help now. To accept this call press zero.
2. RECORDING AN EMERGENCY MESSAGE
A. Press and release the [MENU] button until the “RECORD MESSAGE” is
shown in the LCD display.
B. Press and hold the [OK/DIAL]. Start your message directly after you hear
the “BEEP” tone and “VOICE” icon is flashing. While recording, keep at a
distance of 15cm from the telephone so that you speak easily into the
microphone on the upper side.
C. Release [OK/DIAL] after you have finished your emergency message. The
message will now be played back automatically.
3. CHECKING THE EMERGENCY MESSAGE
You can check the emergency message at any time.
A. Press and release the [MENU] button until the words “CHECK MESSAGE”
appear on the LCD screen.
B. The press [OK/DIAL] to play back the message.
4. DELETING EMERGENCY MESSAGE (REVERT TO PRE-RECORDED
MESSAGE)
If you have recorded your own message, you can delete this and by doing so
revert to the pre-recording message. Note: As stated above, it is important to
record a personalized message.
A. Press and release the [MENU] button until the words “CHECK MESSAGE”
appear on the LCD screen.