HP (Hewlett-Packard) H1930 PDAs & Smartphones User Manual


 
Troubleshooting
User’s Guide 9–7
Expansion Cards
For more information on expansion cards, refer to Chapter 6,
“Using Expansion Cards.”
Problem Solution
I cannot get my
iPAQ Pocket PC
to recognize the
expansion card.
Be sure you have firmly pushed the expansion card down into
the iPAQ Pocket PC. Make sure third party SDIO drivers are
installed.
I cannot insert
my card.
Be sure you are not inserting the card at an angle.
Be sure you insert the connection area first.
I cannot remove
my SDIO card.
Push the SDIO card in to release the locking mechanism. The
card will pop out slightly and can and be easily removed.
My iPAQ Pocket
PC cannot
recognize
my card.
Reset the device by using the stylus to lightly press the
Reset button on the side of the unit.
Be sure you loaded any drivers that came with the
purchased expansion card.