Filter
Top Products
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM HT286/386/486/488/496/BT100 DOCUMENT NUMBER
©
2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 7 OF 23
3 Device Capabilities and Known Interoperability Issues
This section describes the features supported by the HT-286 / HT-386 / HT-486 / HT-488 /
HT-496 / BT-100, as well as BroadWorks interoperability issues and impact. The following
table describes capabilities.
Verified Revisions shows the results of partner (vendor) testing of a specific BroadWorks
version with a specific partner’s device under test (DUT) version.
Compatible Revisions indicates the maintenance versions that should interface properly
with BroadWorks.
3.1 Capabilities
Device Type SIP ATA
Lines and Appearances HT-286: 1 line 1 appearance per line
HT-386: 2 lines 1 appearance per line
HT-486: 1 line 1 appearance per line
HT-486: 1 line 1 appearance per line
HT-496: 2 lines 1 appearance per line
BT-100: 1 line 1 appearance per line
Speaker/Power/Bridge HT-286: No/No/Yes
HT-386: No/No/Yes
HT-486: No/No/Yes
HT-488: No/No/Yes
HT-496: No/No/Yes
BT-100: Yes/No/Yes
Indicates speaker phone, in-line power, device
bridge/conference.
Verified Revisions BroadWorks Release: 14.SP2
Grandstream HT-286: 1.1.0.8
Grandstream HT-386: 1.0.3.96
Grandstream HT-486: 1.1.0.8
Grandstream HT-488: 1.0.3.96
Grandstream HT-496: 1.0.3.96
Grandstream BT-100: 1.1.0.8
Compatible Revisions BroadWorks Release: 14.SP2
Grandstream HT-286: any maintenance version of
1.1.0.8
Grandstream HT-386: any maintenance version of
1.0.3.96
Grandstream HT-486: any maintenance version of
1.1.0.8
Grandstream HT-488: any maintenance version of
1.0.3.96
Grandstream HT496: any maintenance version of