Grandstream Networks HT386 Telephone Accessories User Manual


 
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM HT286/386/486/488/496/BT100 DOCUMENT NUMBER
©
2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 16 OF 23
7 Enhanced IP Phone Configuration
Enhanced IP Phone Configuration is a BroadWorks feature that enables automatic
generation of device configuration files, given administrator-supplied templates.
For more information on the Enhanced IP Phone Configuration feature, see the Enhanced
IP Phone Configuration Guide
[3].
The HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100 uses only a phone-specific file
to configure the device. However, the Enhanced IP Phone Configuration feature requires
a system and a phone-specific file for each device. To satisfy the system file requirement,
an empty file (ataDefault.txt, bt100Desfult.txt) will need to be uploaded to BroadWorks as
the system file. This file will be sent to the FTP server but will not actually be used for the
configuration file generation. The group template file is used to build the configuration files
for the devices of this device type assigned to the group. For a sample HT-286 / HT-386 /
HT-486 / HT-488 / HT-496 / BT-100 group template file, see Appendix A.
NOTE: BroadSoft does not manage or distribute template files for use with the Enhanced IP
Phone Configuration feature. Obtain template files from Grandstream or use the configuration
files obtained from Grandstream for the specific Grandstream firmware release to create
template files appropriate for your installation.
Since HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100 require the configuration files be
converted into a binary format, an extra step must be performed when using this feature. After
the configuration files have been sent to the TFTP server and before the phone is reset, the
configuration files must be converted to binary format using Grandstream’s configuration tool.
For detailed information on automated provisioning, please check the Grandstream configuration
tool user guide [2].