Filter
Top Products
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM HT286/386/486/488/496/BT100 DOCUMENT NUMBER
©
2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 15 OF 23
6.2 Subscriber Level Configuration Parameters
This section identifies the device-specific parameters, including registration and
authentication. These settings must be unique across devices in order to be matched with
the settings for a BroadWorks subscriber.
Provisioning a subscriber to register with BroadWorks allows calls to terminate to the
subscriber’s line. Registration requires that a unique address of record (AoR) is
provisioned on BroadWorks and the phone; provisioning an AoR on BroadWorks consists
of setting the line/port parameter to a unique value within the Application Server cluster.
Grandstream HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100 supports one SIP
accounts (lines), two SIP accounts, one SIP account, two SIP accounts, two SIP
accounts, and 1 SIP account, respectively. The follow example shows how to configure
subscriber elements for an account.
Step Command Purpose
Subscriber Configuration Items
Step 1
Set Register User ID for each
line.
Example:
SIP User_ID = "2405551111" ;
The register user ID must
correspond with the line/port
setting on BroadWorks.
Step 2
Enable SIP Authentication for
each line.
Example:
Authenticate ID =
"1111@as.mycompany.com" ;
Authenticate Password = "welcome"
;
If the Authentication service is
configured on BroadWorks, these
parameters must be configured to
match the BroadWorks settings.
Step 3
Configure display name for each
line.
Example:
Name = “Claire Smith” ;
For each line, configure the name
to be displayed on the device.