Filter
Top Products
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM HT286/386/486/488/496/BT100 DOCUMENT NUMBER
©
2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 14 OF 23
6.1 System Level Configuration
This section describes system-wide configuration items that are generally required for
each HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100 to work with BroadWorks.
Subscriber-specific settings are described in the next section.
{THIS IS JUST AN EXAMPLE AND IS NOT INTENDED AS A COMPLETE OR
SUFFICIENT TABLE OF PARAMETERS. EACH DEVICE WILL VARY AND MAY BE
COMPLETELY DIFFERENT. IF YOUR DEVICE DOES NOT SUPPORT CONFIG
FILES USE GUI CAPTURES OR OTHER METHODS TO DESCRIBE THE
CONFIGURATION.}
Step Command Purpose
System Configuration Items
Step 1
Set SIP Proxy/Domain.
sipProxy = as.broadworks.net
Set the HT-286 / HT-386 / HT-
486 / HT-488 / HT-496 / BT-100
SIP server to the Fully Qualified
Domain Name (FQDN) for the
BroadWorks Application Server
cluster.
The domain must match the
domain configured for the
BroadWorks subscriber’s
line/port domain.
Step 2
Set Outbound Proxy.
outBoundProxy =
sbc.broadworks.net
Set the outbound proxy to the
session border controller (SBC)
if one is deployed between the
HT-286 / HT-386 / HT-486 / HT-
488 / HT-496 / BT-100 and
BroadWorks.
If there are redundant SBCs, set
it to the FQDN for the SBC
cluster.
Step 3
Enable DNS SRV lookup.
Use_DNS_SRV = “Yes” ;
Enable DNS SRV lookups.
Step 4
Set register mode.
SIP Registration = “Yes”
Enable SIP register.
Step 5
Set SIP Timers.
Register Expiration = 60
The default registration period is
60 minutes.
Step 6
Enable negotiated DTMF type.
Send DTMF = “via RTP (RFC2833)”
Set the HT-286 / HT-386 / HT-
486 / HT-488 / HT-496 / BT-100
to enable inband or RFC 2833
negotiated DTMF.
Step 7
Disable local feature code
services.
Enable Call Features = “No”
Disable feature access codes
controlled by the device.
Step 8
Enable BroadSoft mode.
Special Feature = “Broadsoft”
Set the HT-286 / HT-386 / HT-
486 / HT-488 / HT-496 / BT-100
in BroadSoft mode.