Filter
Top Products
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM HT286/386/486/488/496/BT100 DOCUMENT NUMBER
©
2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 10 OF 23
4 BroadWorks Device Identity/Profile
BroadWorks configurable device identify/profile is introduced in BroadWorks Release
14.0. This section applies only to BroadWorks Release 14.0 and later.
The following table identifies the required BroadWorks device identity/profile settings for
interoperability between the HT496 and BroadWorks. For an explanation of the profile
parameters, refer to the BroadWorks Device Inventory Guide
[4].
For most of the parameters below, an “X” indicates the parameter function is supported
and/or required. If the item is blank, it is not supported.
Grandstream HT-286 / HT-386 / HT-486 / HT-488 / HT-496 / BT-100
Identify/Device Profile
Signaling Address Type Intelligent Proxy Addressing
Number of Lines HT-286/HT-486/BT-100: 1 line
HT-386/HT-488/HT-496: 2 lines
Ringback Tone/ Early Media
Support
Local Ringback – No Early Media
Authentication Enabled
Registration Capable X
Static Registration Capable
E.164 Capable
Trusted
Authenticate REFER X
Authentication Override
Video Capable
RFC 3264 Hold X
Route Advance
Wireless Integration
PBX Integration
Use Business Trunking Contact
Forwarding Override
Conference Device
Music On Hold Device
Auto Configuration Soft Client
Web Based Configuration URL http//:%BWIPADDRESS%
Auto Configuration Type 2 Config File
Reset Event checkSync
Enable Monitoring
CPE System File Name
ataSystem.txt/bt100System.txt