Filter
Top Products
FIRMWARE VERSION 1.0.4.23 GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 51 of 69
U.S central time. If it is positive (+) if the local time zone is west of the
Prime Meridian (A.K.A: International or Greenwich Meridian) and
negative (-) if it is east.
M4.1.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday,
3
rd
Tuesday…)
The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon,
Tues, ... ,Sat)
Therefore, this example is the DST which starts from the First Sunday of
April to the 1st Sunday of November.
Enable Weather Update
Configures to enable or disable weather update on the phone. The
default setting is "Yes". If set to "No", the weather information screen will
not show.
City Code
Configures weather city code for the phone to look
up the weather
information. The default setting is "Automatic" and the weather
information will be obtained based on the IP location of the phone if
available. Otherwise, specify the self-defined city code. For example,
USCA0638 is the city code for Los Angeles, CA, United States.
Update Interval
Specifies the weather update interval (in minutes). The default value is
15 minutes.
Degree Unit
Specifies the degree unit for the weather information to display on the
phone.
Enable Stock Update
Configures to enable or disable stock update on the phone (Not
applicable to GXP1450). The default setting is "Yes". If set to "No", the
stock information screen will not show.
Stock Code
Configures stock code for the phone to look up and display the stock
information (Not applicable to GXP1450).
Enable Currency Update
Configures to enable or disable currency update on the phone (Not
applicable to GXP1450). The default setting is "Yes". If set to "No", the
currency information screen will not show.
Currency Code
Configures currency code for the phone to look up and display the
currency information (Not applicable to GXP1450).
LCD Backlight Brightness
Configures the LCD backlight brightness level (from 0 to 8) for phone's
idle status and active status. The default value is 6 for active status and
2 for idle status.
LCD Contrast Configures the LCD contrast level (from 0 to 20). The default value is 10.