Filter
Top Products
FIRMWARE VERSION 1.0.4.23 GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 46 of 69
between 96 and 127.
Jitter Buffer Type
Selects either Fixed or Adaptive based on network conditions. The
default setting is "Adaptive".
Jitter Buffer Length
Selects Low, Medium, or High based on network conditions. The default
setting is "Medium".
Eventlist BLF URI
Configures the eventlist BLF URI on the phone to monitor the extensions
in the list with Multi Purpose Key. If the server supports this feature,
users need to configure an eventlist BLF URI on the service side first
(i.e., BLF1006@myserver.com) with a list of extension included. On the
phone, in this "eventlist BLF URI" field, fill in the URI without the domain
(i.e., BLF1006). To monitor the entensions in the list, under Web
GUI->Basic Setting page, please select "eventlist BLF" in
the Multi
Purpose Key key mode, choose account, enter Name and User ID of
each extension in the list. (Not applicable to GXP1450)
Conference URI
Configures the conference URI when using Broadsoft N-
way calling
feature.
Use Privacy Header
Controls whether the Privacy Header will present in the SIP INVITE
message or not. The default setting is "default", which is when "Huawei
IMS" special feature is on, the Privacy Header will not show in INVITE. If
set to "Yes", the Privacy Header will always show in INVITE. If set to
"No", the Privacy Header will not show in INVITE.
Use P-Preferred-Identity
Header
Controls whether the P-Preferred-Identity Header will present in the SIP
INVITE message or not. The default setting is "default", which is when
"Huawei IMS" special feature is on, the P-Preferred-Identity Header will
not show in INVITE. If set to "Yes", the P-Preferred-Identity Header will
always show in INVITE. If set to "No", the P-Preferred-Identity Header
will not show in INVITE.
Special Feature
Different soft switch vendors have special requirements. Therefore users
may need select special features to meet these requirements. Users can
choose from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro
or Huawei IMS depending on the server type. The default s
etting is
"Standard".
SETTINGS/BASIC SETTINGS PAGE
End User Password
Allows the administrator to set the password for user-
level web GUI
access. This field is case sensitive with a maximum length of 30