Filter
Top Products
FIRMWARE VERSION 1.0.4.23 GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 48 of 69
to EAP-MD5.
Identity Enter the Identity for the 802.1x mode.
MD5 Password Enter the MD5 Password for the 802.1x mode.
HTTP Proxy
Specifies the HTTP proxy URL for the phone to send packets to. The
proxy server will act as an intermediary to route the packets to the
destination.
HTTPS Proxy
Specifies the HTTPS proxy URL for the phone to send packets to. The
proxy server will act as an intermediary to route the packets to the
destination.
Line Key X
Assigns a function to the corresponding line key. The key mode options
are:
• Line
Regular line key to open up a line and switch line. The Name and
UserID can be left blank.
• Share Line
Share line for Shared Line Appearance feature. Select the Account
registered as Shared line for the line key. The Name and UserID can
be left blank.
• Speed Dial
Select the Account to dial from. And enter the Speed Dial number in
UserID field to be dialed.
• Busy Lamp Field (BLF)
Select the Account to monitor the BLF status. Enter the extension
number in UserID field to be monitored.
• Presence Watcher
This option has to be supported by a presence server and it is tied to
the "Do Not Disturb" status of the phone's extension.
• Eventlist BLF
This option is similar to the BLF option but in this case the PBX
collects the information from the phones and sends it out in one
single notify message. PBX server has to support this feature.
• Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active
account. For
example, if the phone is offhook and account 2 is
active, it will call the configured Speed Dial number using account 2.
• Dial DTMF
Enter a series of DTMF digits in the UserID field to be dialed during
the call. "Enable MPK Sending DTMF" (under Advanced Setting)
has to be set to "Yes" first.