Filter
Top Products
Using Several Base
A second base can be connected to the network in order to extend the
range of the handsets. When another base is registered to a handset, the
handset can automatically search for the next base if you go outside the
range of the first base. The transfer between bases is handled
automatically, although this cannot be done whilst a call is in progress.
The bases coverage areas must overlap to ensure there are no gaps in
the coverage.
Adding a Base
Connect the base to the mains power and telephone network as
described in the Installation section
Register the handset as described in the Handset Registration
section
Remark: The first registered handset has priority on the first base. It will
be activated when the handset move sto the second base
To check if your handset or all handsets registered to this new base are
actually registered, simply press the
button on the new base, all
handsets registered to this base will ring.
IMPORTANT: If you connect several bases together, the handsets
registered to the additional bases will ring for a few seconds during
an incoming call even if you take the line with one of the first base
handsets.
47
Other Optional Accessories
If you wish you can connect a headset ref: HEADCL_BLK ( CLA3) or a
neck loop Ref : CLA7 to the socket located on the bottom of the handset.
You can still use all phone functions as described before. To answer a call
simply press
to take the line and press a second time to
release the line.
48
A
DDITIONAL HANDSETS & BASES
A
DDITIONAL HANDSETS & BASES