Filter
Top Products
13
2. Plug one end of the telephone line cord into the
jack
on the back of the base/gateway and the other end into a
modular jack.
NOTE: Landline connection is not necessary for
Skype usage.
IMPORTANT NOTE: Emergency calls via the
landline are only possible if power is applied
to the base station and the landline is properly
connected.
3. Connect the ethernet cable to the
jack in the base/
gateway and to your internet connection.
4. Plug the AC power converter into the electrical outlet and the
DC connector into the jack on the back of the base/gateway.
CAUTION: Use only the SALOM Model SSW-
1328US power adaptor that came with this
unit. Using other power adaptors may damage
the unit.
This power adaptor is intended to
be correctly orientated in a vertical or floor
mount position.
Base Station
1. Choose an area near an electrical outlet and a telephone wall
jack (RJ11C), and place your base/gateway on a level surface
near your high speed internet connection.
NOTE: If your computer or other equipment is
occupying all available internet connections you
will need to purchase a router.