Filter
Top Products
0
3. All registered handsets beep for two minutes and PAGING FROM BASE
shows on each handset’s display.
4. To cancel the page, press the PAGE button on the base, or press the
TALK/CALL BACK button or the *EXIT button on each handset.
Handset to Handset Paging
IMPORTANT NOTE: The following procedures can ONLY be
done with Model 28011 and 28041 handsets.
1. Make sure the originating phone is OFF (not in talk mode).
. Press the MENU button and use the 6 or 5 button to scroll to
INTERCOM.
3. Press the SELECT button to enter the menu.
NOTE: You can press the INT button to shortcut to the menu.
4. A list of registered handsets shows on the display. Use the 6 or 5
button to scroll to the desired handset you want to page. Or scroll to
GLOBAL PAGE to page all handsets.
5. Press the SELECT button.
6. The receiving handset is paged and emits a tone.
7. To cancel the page, press the *EXIT, INT or TALK/CALL BACK button on
the originating handset
-OR-
Press the INT button on the receiving handset to enter intercom mode.
Mute
To have a private, off-line conversation, use the mute feature. The party
on the other end of the line cannot hear you, but you can still hear them.
When you are using the phone, press the SELECT button to activate the
mute function. To de-activate, press the SELECT button again.
Ringer Volume (Shortcut)
There are two ways to set the ringer volume. One is via the handset
menu as described in the section Telephone Setup/ Sound Setting/Ringer
Volume, while the other one is this short cut.
1.
Make sure the phone is OFF (not in talk mode).
. Press the #PAUSE/RINGER button to enter
the RINGER VOLUME menu.
3. Use the 6 or 5 button to scroll to the
desired ringer volume.
The default is LOW.
4. Press the SELECT or #PAUSE/RINGER button
again to save your selection. You will hear a
conrmation tone.
OFF
RINGER VOLUME
LOW
HIGH