Filter
Top Products
26
You should erase some messages so the answering system can record
new messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access
the answering system, enter your 3-digit security code after you hear the beep.
ACCESSING THE ANSWERING SYSTEM FROM ANOTHER LOCATION
You can access your answering system from any touch-tone phone by
entering your 3-digit security code after you hear the outgoing
announcement.
1. Dial the telephone number the answering system is connected to.
2. Enter the security code after you hear the tone.
3. Follow the voice menu to use the answering system's remote functions.
The remote feature lets you perform the following functions:
To Press this Button
Review message 1
Play back messages 2
Stop message playback 2
Erase message 0 (during message playback)
Skip message 3
Turn off/on answerer 4
Review voice menu options 7
TIP: You can bypass the outgoing announcement by pressing any numbered
key on the touch-tone pad while the announcement is playing. Then, you can
enter your security code to access the answering system.
CHANGING THE SECURITY CODE
The default security code for accessing the answering system from
another location is 1 2 3. You must use the handset to change the security
code. With the phone OFF (not in TALK mode), follow these steps:
1. Press answerer/delete (the indicator comes on).
2. Press *TONE to display the
SECURITY CODE
.