Filter
Top Products
23
DIALING A STORED NUMBER
1. Make sure the phone is ON by pressing the TALK/callback button.
2. Press the memory button.
3. Press the number (0-9) for the desired memory location. The number
dials automatically.
OR
1. Make sure the phone is OFF (not in TALK mode).
2. Press the memory button.
3. Use the CID/VOL left (-) or right (+) arrow button to scroll through the
numbers stored in memory until the desired number is shown.
4. Press TALK/callback. The number dials automatically.
IMPORTANT: If you make test calls to emergency numbers stored in memory,
remain on the line and briefly explain the reason for the call to the dispatcher.
Also, it’s a good idea to make these calls in off-peak hours, such as early
morning or late evening.
CHAIN DIALING FROM MEMORY
Use this feature to make calls which require a sequence of numbers such as
using a calling card for a frequently called long distance number. You dial each
part of the sequence from memory. The following example shows how you
can use chain dialing to make a call through a long distance service:
The Number For Memory Location
Long distance access number 7
Authorization code 8
Frequently called long distance number 9
1. Make sure the phone is ON by pressing the TALK/callback button.
2. Press the memory button and then press 7.
3. When you hear the access tone, press memory again and then press 8.
4. At the next access tone, press memory and then 9.
TIP: Wait for the access tones before pressing the memory button, or your call
might not go through.