Filter
Top Products
15
3. To erase a message from the handset:
•Press answerer/delete button to enter into the handset remote
access operation.
•Press play/stop on the handset (the 2 button). The message plays.
•Press erase (the 0 button) to erase the message during message
playback.
NOTE: Erased messages cannot be restored.
LEAVING A MEMO
Use the memo feature to leave a message.
1. Press and hold the memo button.
2. Begin speaking after you hear the beep.
3. Release the memo button when you finish.
TELEPHONE SET UP
PROGRAMMABLE MENUS
There are four programmable menus available: Language, Local Area
Code, Tone/Pulse and Factory Default. When you program these settings,
make sure the phone is OFF ( not in talk mode).
DISPLAY LANGUAGE
1. Press the program button until
1 ENGLISH 2 FRA 3 ESP
shows in the display.
2. Use the CID/VOL left (-) or right (+) arrow button or the handset touch-
tone pad to enter your selection.
3. Press program to confirm.
NOTE: Press the EXIT button once to keep the previous setting and return to
the standby screen.
LOCAL AREA CODE
1. Press the program button until
SET AREA CODE
shows in the display. The
default is - - -.
2. Use the handset touch-tone pad to enter the area code.