GE 16174120 Answering Machine User Manual


 
13
Message Move
The Message Move feature allows you to easily move messages from one mailbox to another.
1. Press and release the desired mailbox where the message you want to move is located.
2. Press and release NEXT or PREVIOUS until the desired message to move is playing.
3. Press and release the mailbox button where you want the message to move. The unit announces the
message has been moved.
4. Release the mailbox button. The moved message is now a “new” message in that mailbox.
Message Scan
Message Scan allows you to listen to the first 5 seconds of each message within a mailbox.
1. Press and release SCAN. The unit shows Sc and asks you to select a mailbox.
2. Press the desired mailbox button. The unit plays back the first 5 seconds of each message in the
mailbox. When finished, it automatically exits Scan mode.
While Scanning Messages
To stop playback, press and release STOP.
To hear the complete message, press and release the mailbox button where the message is located
before the unit goes on to the next message.
To restart the message, press and hold PREVIOUS.
To skip to the next message, press and release NEXT.
To erase the message, press and hold ERASE until the unit announces it has been erased.
To move the message to another mailbox, press and release the desired mailbox where you want to
move the message.
NOTE: New messages must be heard completely, including the time/day stamp, before
they can be erased. The unit will announce you have no messages to erase, if not.