Filter
Top Products
5. SYSTEM SETUP
5-2
5.3 Naming Intercom
1. Press the MENU key.
****SETUPMENU****
ALARM
ERASELOG
MEMORYCHANNEL
AUTOACK
MESSAGEFILEENTRY
T
****SETUPMENU****
VOLUME
TEST
PRINTOUT
SYSTEM
T
POSITION
2. Rotate the CH knob (or press up / down arrow key) to choose SYSTEM from
page 2 of the menu and press the ENT key. The following window appears.
*SYSTEMSETUPMENU*
SELFID---------------------
GROUPIDLIST
INTERCOMNAMING
PROGRAMVERSION
3. Rotate the CH knob (or press up / down arrow key) to choose INTERCOM
NAMING and press the ENT key. The following window appears.
*IntercomNamingMenu*
1:Handset1
2:Handset2
3:Handset3
4:Handset4
RT:FM8800
4. Rotate the CH knob (or press up / down arrow key) to choose a handset
number and press the ENT key.
5. Key in remote station name with alphanumeric keys and press the ENT key.
6. Repeat steps 4 and 5 to name other handsets.
To change the default name, for example, “1: Handset 1”, rotate the CH knob to
move the cursor to right of “1”.
1: Handset 1
↑
Move cursor here. And then press the ▼ key to delete the characters.
Enter a new name for the remote station.