Filter
Top Products
4-1
4. BASIC SETUP
4.1 Alarm Setup
This section provides the procedures for setting up various alarms. The alarm
menu enables/disables internal and external alarms. Note that the
Distress/Urgency alarm cannot be disabled.
Old position alarm in manual position entry mode
This alerts the operator when manually entered position data is older by the
number of hours or minutes set.
1. Press the MENU key.
****SETUPMENU****
ALARM
ERASELOG
MEMORYCHANNEL
AUTOACK
MESSAGEFILEENTRY
T
*SETUPMENU*
ALARM
ERASELOG
MEMORYCH
AUTOACK
MESSAGEFILE
T
SETUP MENU on transceiver unit SETUP MENU on remote handset
2. ALARM is selected; press the ENT key to display the ALARM menu.
****ALARMMENU****
POSITIONOLDER4H
EXTALARM
*ALARMMENU*
POS.OLDER
4H
EXTALARM
ALARM MENU on transceiver unit
ALARM MENU on remote handset
3. Rotate the CH knob (or press up / down arrow key) to choose POSITION
OLDER (POS. OLDER for remote handset) from the ALARM MENU and
press the ENT key. The following setting window appears.
4. Rotate the CH knob (or press up / down arrow key) to choose an appropriate
value and press the ENT key.
Alarm is output when position is older by the number of hours set here.
5. Press the CANCEL key twice to return to the standby display.