Filter
Top Products
3. DSC OPERATION FOR NON-DISTRESS CASES
3-12
13. Choose SELECT CH or NO INFO as appropriate followed by pressing the
ENT key. If you chose SELECT CH, the following channel list appears. (The
example shown is the international, duplex channel list.) Rotate the CH knob
(or press up / down arrow key) to choose a channel you wish to communicate
and press the ENT key.
DUP CHANNEL
01
02
03
04
05
07
18
19
86
28
60
61
62
63
64
65
66
78
79
80
81
82
83
84
85
20
21
22
23
24
25
26
27
14. Press the CALL key more than three seconds. A message will be
transmitted.
3.2.2 Receiving a group call
Group ID must be registered in order to receive a group call. See paragraph 4.5.
1. When a group call is received, the alarm sounds and the ALARM LED blinks
two minutes.
Group
call received.
FROM : 123456789
TO : 0234567
ROUTINE
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
CH : 08
CANCEL ALARM
2. Press the CANCEL or ENT key to silence the alarm. The following display
appears.
** Received Message **
GROUP CALL
APR01/04 12 : 34 ECC : OK
FROM : 123456789
TO : 023456789
ROUTINE
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
CH : 08
PRESS ENT
3. Press the ENT key. You can now communicate with the party, over the
VHF
channel specified.