Description
BusinessPhone – Ericsson Dialog 4422 IP Office12
Display Information
The display provides feedback information such as time and date,
and connected phone numbers.
When an information ends with three dots (...), this means that the
system is working or waiting for your action. When an information
ends with an exclamation mark (!), this means that no further action
is possible.
You can change the display menu language and the date/time
format, see section “Settings” on page 75.
Depending on the traffic state, the upper display row shows:
• Time and date
• Missed calls
•For SOS calls, dial xxx (only shown, if programmed by the
system administrator)
Depending on the traffic state, the lower display row shows:
• User's name and number
• Called number and name for internal calls
• Called number for external calls
• Calling number and name for internal and external calls *)
• Volume level bar
• Additional information, e.g. absence reason, diversion state etc.
Note: Depending on the text width the text of the second
row is shown either regular or bold,
*) The provisioning of external calling numbers is network
dependent. Even when it is provided it might happen that callers
are suppressing their numbers, in this case the display only shows
’Incoming....’. If a name is available to the external caller‘s number
in your system, it is also shown on the display. (Please contact your
system administrator whether the feature ’Name presentation for
external calls’ is available in your system).