Filter
Top Products
Quick start
9
Not fo
rC
o
m
me
rc
i
a
l Use
Ericsso
n
Mo
bi
l
e Communi
c
ations AB
4. Insert the power adapter plug into the wall
socket.
If the red light on the home base station is
flashing, there is something wrong with the
telephone line connection.
5. Connect the desk stand to the home base station.
Locate the lower hooks first. The cables can be
routed through the slots in the rear lower edge of
the desk stand.
6. Remove the insulation strip from the battery at
the bottom of the cordless phone.
7. Put the cordless phone in the home base station
for at least 3.5 hours to charge the batteries
initially.
When the batteries are charged the cordless phone is
ready for use. For more information about charging
batteries refer to the topic following.
Operating range
You can use your cordless phone in the area that is
covered by the home base station or other telephone
system (check with your dealer). Outside this area,
you will lose contact with the system and the system
icon on the display will start flashing. The warning
light will flash and short, fast, warning beeps will be
heard.
To make optimal use of the operating range, place
your home base station centrally.