Filter
Top Products
38
Not fo
rC
o
m
me
rc
i
a
l Use
Ericsso
n
Mo
bi
l
e Communi
c
ations AB
Selecting call back ring type
If you transfer an external call to another cordless phone
without waiting for an answer, you will be called back by
the home base station, if the third party does not answer
within ten seconds. You can select one of five different ring
types for calling back by the home base station.
To change the call back ring type for the home base
station:
1. Press and then 9.
You will hear the next call back ring type.
2. Keep pressing and then 9 until you hear the
ring type you want.
The last ring type you select will be stored for call
back.
Setting ringing order
When the home base station receives an external call, all
cordless phones ring. The home base station is preset so that
all cordless phones ring at the same time. However, you can
also set the order in which the cordless phones ring.
Setting the ringing order
Using a cordless phone, you can program the order in
which the cordless phones should ring.
1. Press and then press the R key for 2 seconds.
Four dashes are displayed.
2. Enter the PIN code for the home base station
(default is 1111).
Two dashes are displayed.
3. Enter 44.
The current ringing order is displayed.