Filter
Top Products
32
Not fo
rC
o
m
me
rc
i
a
l Use
Ericsso
n
Mo
bi
l
e Communi
c
ations AB
Setting the cordless phone
temporarily to tone dialling
*
If your cordless telephone system normally uses pulse dialling
you can switch to tone dialling if required, for example to
control a teleservice.
To switch the cordless phone to tone dialling during
a call, press and then *. When you hang up the
cordless phone reverts to the pulse dialling again.
To either select tone or pulse dialling permanently
refer to the previous topic.
Setting the cordless phone to long
tones
The tones transmitted by the cordless phone may be too short
for some interactive information services. If you have
problems, you can temporarily change the length of the tones.
If the cordless phone is set to long tones, the tones
will be transmitted for as long as you keep the
numeric keys pressed.
To switch the cordless phone to long tones during a
call, press and then 0. To switch off the long tones,
press and 0 again, or hang up.
* This function may not be supported by your system.