Filter
Top Products
~31~
4. Pressing th
key on the will select the
"XFER" function, initiating transferring
the call to target handset.
5. Pressing END will terminate a
handset to handset call, the
originating handset will then display:
From the TALK mode, you can end a
call by pressing END or by placing the
handset in the cradle. The handset will
return to the IDLE mode.
The LCD will show the following:
RIGHT SOFT FUNCTION
handset
Disconnecting Calls
EnGenius
SN-920
REDIAL MENU
Base I on Hold
UNHOLD MENU
00:00:30
Volume: 3
MUTE XFER
* The target handset LCD will show
the following readout:
* Upon answering, the originating
and target handset users can talk.
Intercom from
Handset 12
SILENT
~32~
The EnGenius SN-920 ULTRA Industrial Cordless Phone System
offers private, 2-way radio calls from handset to handset, even
when handsets are beyond the range of the base unit. 2-way or
intercom calls can be placed from or to base units and handsets.
Intercom calls can be established between a handset and an
available and registered base unit or second handset. Handset-
to-Handset (2-way Radio) communication can be achieved
anywhere providing the two communicating handsets are within
range of each other.
1. To initiate a handset to handset call
press the 2-WAY key and enter the
"extension" ID number desired.
(The extension number or handset
ID number is the 2 digit number
located to the right of the icon):
* The LCD will then display this screen:
* Once the voice link is successfully
established, the handsets' LCD will
display:
2. The 2-WAY call can be terminated
by either handset, at any time,
pressing END.
Digital 2-Way Radio Mode
Handset to Handset Calls
ADVANCED OPERATIONS
Enter
Extension # ??
Paging
extension#:11
Volume: 5
MUTE