Filter
Top Products
25
2.) After installing the necessary adapter in the docking area and making sure
that it is locked in place, and then insert your iPod into the adapter so that the
30-pin connector in the docking area is fully inserted into the 30-pin socket on
the bottom of your iPod.
If necessary set the “HOLD” switch on your iPod to the “Off” position.
3.) Press the Power button on the top panel to turn this system ‘On’. Depending
on the setting of the Back Light Timer in your iPod the display backlighting
may turn ‘On’ and the “Charging” or “Charged” indicator will appear in the
display.
4.) Press the Function button on the top panel to select the iPod function. The
display will show “iPod” briefly and then return to the correct time.
Your iPod will begin to play. It may begin playback with the first song in your
library in alphabetical order by song name, or if the iPod was only shut off for
short time it may begin playback of the same song that was playing before it
was shut off.
NOTE: If the Power of this system is ‘On’ and the iPod function is
already selected then your iPod will begin to play as soon as it is
connected to the dock, as long as the iPod HOLD switch is ‘Off’. If
your iPod enters the Pause mode when you connect it to the dock,
press the Play/Pause button to begin playback.
iC172 IB 301207new3.p65 26/3/2008, 11:1125