Filter
Top Products
Reference Manual
00809-0100-4708, Rev AD
September 2012
B-1
Rosemount 708
Appendix B Product Certifications
Approved Manufacturing Locations . . . . . . . . . . . . . . . . . page B-1
Telecommunication Compliance . . . . . . . . . . . . . . . . . . . . page B-1
FCC and IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-1
European Union Directive Information . . . . . . . . . . . . . . . page B-1
Ordinary Location Certification for FM . . . . . . . . . . . . . . . page B-1
Hazardous Locations Certificates . . . . . . . . . . . . . . . . . . . page B-2
Approved Manufacturing
Locations
Rosemount Inc. - Chanhassen, Minnesota, USA
Emerson Process Management GmbH & Co. - Karlstein, Germany
Emerson Process Management Asia Pacific Private Limited - Singapore
Telecommunication
Compliance
All wireless devices require certification to ensure that they adhere to
regulations regarding the use of the RF spectrum. Nearly every country
requires this type of product certification. Emerson is working with
governmental agencies around the world to supply fully compliant products
and remove the rise of violating country directives or laws governing wireless
device usage.
FCC and IC This device complies with Part 15 of the FCC Rules. Operation is subject to
the following conditions: This device may not cause harmful interference. This
device must accept any interference received, including interference that may
cause undesired operation.
This device must be installed to ensure a minimum antenna separation
distance of 20 cm from all persons.
European Union
Directive Information
The EC Declaration of Conformity for all applicable European directives for
this product can be found on www.rosemount.com. A hard copy may be
obtained by contacting your local sales representative.
ATEX Directive (94/9/EC)
Emerson Process Management complies with the ATEX Directive.
Electro Magnetic Compatibility (EMC) (2004/108/EEC)
EN 61326-1; 2006
EN 61326-2-3; 2006
Radio and Telecommunications Terminal Equipment Directive (R & TTE)
(1999/5/EC)
Emerson Process Management complies with the R&TTE Directive.
Ordinary Location
Certification for FM
As standard, the transmitter has been examined and tested to determine that
the design meets basic electrical, mechanical, and fire protection
requirements by FM Approvals, a nationally recognized testing laboratory
(NRTL) as accredited by the Federal Occupational Safety and Health
Administration (OSHA).